YX43-233-700 Roof Panel Roll Forming Machine

Home Cold Roll Forming Machine Roof and Panel Roll Forming Machine YX43-233-700 Roof Panel Roll Forming Machine 0.42-0.48mm 15m/min

Features and Advantages of YX43-233-700 Roof Panel Cold Rolling Mill

This YX43-233-700 roof panel roll forming line produces 700mm effective width color steel roof panels from 914mm raw coil. It is equipped with hydraulic uncoiler, manual pre-shear device, 26–28 forming stations and hydraulic stop cutting unit. It comes with full YX43-223-700 clip mould set including punching, ribbing and clinching moulds, widely used for metal roof construction.

Main Parameters：YX43-233-700 Roof Panel Cold Rolling Mill
1 Machine Type	YX43-233-700 Roof Panel Cold Rolling Mill
2 Main Profile	YX43-233-700 roof panel
3 Supporting Mould	YX43-223-700 clip mould set (punching mould, rib mould, clinching mould)
4 Raw Material	Color steel coil, thickness 0.42–0.48mm, yield strength 550 MPa
5 Feeding Width	914 mm
6 Effective Finished Width	700 mm
7 Hydraulic Un-coiler	5Ton*1250mm hydraulic uncoiler; hydraulic coil expansion; 3KW pump motor; 3KW variable speed motor; strut expansion system; auto stop device; coil ID 510±30mm, max coil OD 1600mm, max coil width 1250mm; ground limit switch
8 Pre-shear Unit	Bending idler roller & hand pull pre-shear, non-powered; max working thickness 0.6mm; for tail cutting reminder
9 Forming Main Mill	Inlet guide; gear & sprocket drive; 26–28 forming stations; wall panel type frame with H-beam base; rollers:45# steel, precision machined + hard chrome plating; shaft diameter Φ75 / Φ95mm; 15KW VFD main motor; max speed 15 m/min; pull-out mesh safety guard above forming section
10 Hydraulic Cutting Unit	Stop-to-cut post cutting; Cr12 heat-treated blades; 4KW hydraulic pump motor; simple safety guard for blade
11 PLC Control System	Auto count, cutting length control; Siemens touch screen, Schneider inverter, Omron encoder; cut-to-length tolerance ≤ ±2 mm; 24V control voltage
12 Finished Run-out Rack	3 sets unpowered receiving rack

The Working Process of Roof Panel Roll Forming Machine

This series of roof panel roll forming machine wll go through the following working procedures: Coil Charging Car (optional)-Decoiler (passive/auto)- Front Shear(optiona)-Feeding and Guiding Table - Filming Covering (optiona)-Roll FormingSystem-Post-Cutting to length (Hydraulic/Motor)- Output Manual Supporter/Stackmaster(optional)

From Consultation to Delivery Standardized Workflow

01

Design Process

140+ Patents
02

Machining

145CNC Machines
03

Assembly

Craftsman Assembly
04

Commissioning

CE Standard
05

Trial Run

Practical Trial Production
06

Inspection

20-Step Quality Inspectic
07

Logistics

100+Countries
08

Customer Acceptance

On-Site Engineer Support
09

After-sales Service

24/7 Support

Core components are made in-house

This series of the profile is designed to be economical wall cladding for residential, industrial, and commercial projects.

Frame

Adopt high-strength H-beam from large standard steel mills.
Use 100% new material, no recycled or second-hand steel.
With stress relief treatment to avoid deformation during long-term use.
Surface painted with anti-corrosion and anti-rust coating for longer service life. Stable structure, low vibration, ensuring machine runs smoothly and safely.
Shaft

Made of high-quality 45# solid steel.
Processed by precision CNC machining for high accuracy.
High strength, not easy to bend or break.
Ensures stable running and long service life of the whole machine.
Rollers

Made of forged material with better toughness and strength.
Treated with professional heat treatment to improve hardness and wear resistance. Machined with high precision for stable forming effect.
Wear-resistant, long service life, low maintenance cost.
Side Plate

Made of high-quality steel plate with high strength.
Processed by advanced cutting and drilling equipment.
Precision machining ensures good matching and stable assembly.
Stable structure, strong load-bearing capacity.
Column

Adopt shot blasting derusting before painting.
High anti-corrosion and anti-rust performance.
Stable structure, strong durability.
Ensures the stability and safety of the whole equipment.
Shaft Sleeve

Precision CNC machining for high matching accuracy.
Good wear resistance and stable performance.
Reduces noise and extends the service life of transmission parts.

Our Team & Quality Control
We are a national high-tech enterprise integrating design, R&D, production, sales and service.
Our company has a professional internal testing laboratory and scientific quality inspection system to strictly control product quality.Our products have passed ISO9001, CE, SGS, TUV, BV certifications, meeting international standards and winning trust from global customers.

Government Cases

This series of the profile is designed to be economical wall cladding for residential, industrial, and commercial projects.

Beijing Daxing Airport
Shanghai Disneyland
Shenzhen Exhibition

Contact form

Our consultants are at your complete disposal to provide further information regarding our products and services. Fill out the form with your information. We will try to answer you in the shortest time possible.